Search Frequent Questions
Filter By:
- Air Emissions Inventories Total results: 34
-
Asbestos
Total results: 141
- Protect Your Family from Exposures to Asbestos Total results: 9
- Asbestos-Contaminated Vermiculite Insulation Total results: 4
- Asbestos and School Buildings Total results: 94
- Information for Owners and Managers of Buildings that Contain Asbestos Total results: 31
- Learn About Asbestos Total results: 2
- Butte Area/Silver Bow Creek Total results: 17
- Coronavirus (COVID-19) Total results: 33
- East Palestine, Ohio Train Derailment Total results: 148
- Emergency Planning and Community Right-to-Know Total results: 301
- Fuel Program Total results: 693
- Great Lakes Funding Total results: 49
- Lead Total results: 401
- MOVES Total results: 57
- Norwood Landfill Site Total results: 30
-
Oil Regulations
Total results: 96
- 40 CFR Part 110 Discharge of Oil Regulation Total results: 9
-
40 CFR Part 112 Spill Prevention, Control, and Countermeasure Rule
Total results: 65
- Miscellaneous SPCC Total results: 8
- 112.1 Applicability Total results: 18
- 112.2 Definitions Total results: 12
- 112.3 Requirement to Prepare an SPCC Plan Total results: 3
- 112.6 Qualified Facilities Total results: 4
- 112.7 General Requirements Total results: 17
- 112.8 Specific Onshore Requirements (Excluding Production) Total results: 3
- 40 CFR Part 112.20 Facility Response Plans Total results: 19
- 40 CFR Part 300 Subpart J Total results: 1
- Miscellaneous Oil Total results: 2
- Permitting Under the Clean Air Act Total results: 13
- Radiation Total results: 1
- Risk Management Program (RMP) Total results: 285
- Southeast Minnesota Groundwater Total results: 11
Active filters:
Remove all filtersDisplaying 1 - 15 of 32 results
-
How do I Create Scripts to run MOVES3 from the Command Line?
See More Frequent Questions about MOVES and Related Models . While the easiest way to interact with MOVES3 is via its graphical user interface (GUI), it is sometimes useful to process MOVES RunSpecs in batches via the Windows command line. To this end, MOVES3 has a set of commands that…
- Last published:
-
Is There Any Documentation Available for Installing MOVES on Linux?
See More Frequent Questions about MOVES and Related Models . MOVES is designed for the Windows operating system and the EPA MOVES Team only tests and supports MOVES in Windows environments. However, users have reported successfully installing and running MOVES in Linux. The instructions for Running MOVES from the Windows…
- Last published:
-
Can I Install MOVES on a Server so More than One User Can Access It?
See More Frequent Questions about MOVES and Related Models . No, MOVES is not a multi-user product. MOVES is primarily intended for use on a Windows10 64-bit personal computer. In addition, we have run MOVES2014a, MOVES2014b and MOVES3 on Windows Server 2012 R2 very successfully for years as a single…
- Last published:
-
My neighbor is re-siding and re-roofing his house and there is material all over the ground. Do I need to be worried about asbestos exposure?
Not all house siding or roofing materials contain asbestos. If you are concerned the material might contain asbestos, you can ask your neighbor whether or not the material has been tested for asbestos. Federal regulations regarding renovations or demolitions of asbestos-containing materials do not apply to a homeowner’s renovation of…
- Last published:
-
How do I know if I have asbestos in my home (in floor tile, ceiling tile, shingles, siding, etc.)?
The only way to be sure whether a material contains asbestos is to have it tested by a qualified laboratory. EPA only recommends testing suspect materials if they are damaged (fraying, crumbling) or if you are planning a renovation that would disturb the suspect material. Samples should be taken by…
- Last published:
-
How do I automate MOVES installation (for example, with Microsoft Endpoint Manager)?
The MOVES installer typically requires user interaction to make various selections. However, if the default installation options are acceptable for your needs, the installer can be run without user interaction on the command line using the /VERYSILENT flag. If this is a first time installation you will need to create…
- Last published:
-
What are the Computer Hardware and Software Requirements for Installing and Running MOVES?
See More Frequent Questions about MOVES and Related Models . MOVES is designed to run on a single personal computer with a Windows 10 or 11 operating system. The recommended minimum hardware for a desktop or laptop computer running MOVES are: 64-bit CPU with 4 or more cores: Intel i7…
- Last published:
-
Does MOVES work with the Apple Macintosh operating system (iOS)?
See More Frequent Questions about MOVES and Related Models . MOVES is designed for the Windows operating system and EPA tests it only on Windows. We do not have the capability to adapt MOVES for iOS or test its use in an Apple environment. We expect MOVES can be used…
- Last published:
-
What changes did EPA finalize to the SPCC Rule in December 2006?
The revised rule modifies requirements for facilities with smaller oil storage capacity and specific types of oil-filled operating equipment. If a facility has 10,000 gallons or less in aggregate aboveground oil storage capacity and the facility meets the oil discharge history criteria, then an owner/operator of a facility may prepare…
- Last published:
-
Are the Java Source Code and Supporting Files for Compiling MOVES Available to Users?
See More Frequent Questions about MOVES and Related Models . EPA’s MOVES source code files and code documentation are available on GitHub . Please note that any changes to the code may affect the operation of MOVES in unintended ways. For State Implementation Plan (SIP) and conformity purposes, the only…
- Last published:
-
What should I do if I’m having problems with MOVES and my computer uses non-Latin characters?
See More Frequent Questions about MOVES and Related Models . MOVES may fail to run if the operating system and MariaDB server are not both set to use UTF-8 character coding. This problem is seen most often on computers that are set to use languages other than English. MOVES does…
- Last published:
-
SPCC change in ownership
If there is a change in ownership at a facility, can the facility operate under the same SPCC Plan without the certification from a professional engineer (PE)? If no change in procedures has been made, it may still be feasible to operate under the existing SPCC Plan. The information in…
- Last published:
-
When I Click on Produce Summary Report Following an Emission Rates Run, Why Do I Get An Error Message that says "Database Error Occurred Trying to Produce Report Header Table"?
See More Frequent Questions about MOVES and Related Models . The Summary Reporter does not work when you choose the Emission Rate calculation in the Scale panel. It only works with the Inventory calculation selection. The emission rates that you generated are found in the RatePerDistance, RatePerProfile and RatePerVehicle tables…
- Last published:
-
What Should I Do About this Warning: "Warning: A Work File Failed. Calculations will be Retried. No data has been lost."?
See More Frequent Questions about MOVES and Related Models . This is just a warning message not an error message so there is nothing to fix. This is a internal timing issue when the MOVES worker tries to access a file and there is a lock on it. This lock…
- Last published:
-
Liability of oil retailers at SPCC regulated farm
If a farm is out of compliance of Spill Prevention, Control, and Countermeasure (SPCC) regulations and is checked by EPA and/or has a spill, is the retailer that filled the tank liable? No, EPA considers the oil tank owner responsible for lack of compliance.
- Last published: