Is a lead-based paint inspection sufficient to determine compliance with requirements of the RRP rule?

Question: Is a lead-based paint inspection, performed by a certified inspector or risk assessor, that includes a written determination that various building components are free of paint or other surface coatings containing lead equal to or in excess of 1.0 milligrams per square centimeter (mg/cm2) or 0.5% by weight sufficient to determine compliance with requirements of the Lead Renovation, Repair, and Painting (RRP) Rule rule?

Answer: The RRP Rule does not apply to target housing where a certified inspector or risk assessor has determined that the components affected by the renovation are free of regulated lead-based paint or that a property is free of lead-based paint for the purposes of the Lead Disclosure Rule. The RRP Rule does not require certified inspectors or certified risk assessors to test each and every component that will be affected by a renovation. Certified inspectors or risk assessors are free to conduct representative sampling, so long as the components to be tested are chosen in accordance with documented methodologies, such as the HUD Guidelines. However, because certified renovator training does not cover representative sampling protocols, certified renovators using EPA-recognized lead test kits or performing paint chip sampling to determine the applicability of the RRP Rule must test each and every component that will be affected in order to determine that the RRP Rule does not apply to a particular renovation. 

Question Number: 23002-18782

Find a printable PDF copy of all frequent questions pertaining to lead.