Search Frequent Questions
Filter By:
- Air Emissions Inventories Total results: 34
- Asbestos Total results: 141
- Butte Area/Silver Bow Creek Total results: 17
- Coronavirus (COVID-19) Total results: 33
- East Palestine, Ohio Train Derailment Total results: 148
- Emergency Planning and Community Right-to-Know Total results: 301
-
Fuel Program
Total results: 693
- Fuels and Fuel Additives (FFARs) Total results: 2
- Gasoline Sulfur Program Total results: 17
- Diesel Sulfur Program Total results: 7
- E15 comments Total results: 1
- Other Total results: 6
- Reformulated Gasoline and Anti-Dumping Total results: 431
- Registration Total results: 9
- Registration and Reporting under 40 CFR 79 Total results: 19
- Renewable Fuel Standard (RFS1) Total results: 67
- Renewable Fuel Standard (RFS2) Total results: 111
- Reporting Total results: 22
- Great Lakes Funding Total results: 92
- Lead Total results: 398
- MOVES Total results: 57
- Norwood Landfill Site Total results: 30
- Oil Regulations Total results: 96
- Permitting Under the Clean Air Act Total results: 19
- Radiation Total results: 1
- Risk Management Program (RMP) Total results: 285
- Southeast Minnesota Groundwater Total results: 11
Active filters:
Remove all filtersDisplaying 1 - 15 of 21 results
-
What is the Tier 2 Vehicle & Gasoline Sulfur Program?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The Tier 2 Vehicle and Gasoline Sulfur Program is a landmark program, begun in January 2004, that affects every new passenger vehicle and every gallon of gasoline sold in the U.S. By designing cleaner cars that run on…
- Last published:
-
Can a refiner or importer use gasoline sulfur test methods other than ASTM D 2622-98, especially for sulfur levels of 10 ppm and less?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The rule designates ASTM D 2622 as the benchmark test method by which compliance will be determined, and that is the test that the Agency typically will use in establishing compliance. However, the rule does permit alternative test…
- Last published:
-
There is significant difference between "refiner" and "refinery". Portions of the regulations use "refiner" where "refinery" is the appropriate term. While it may be clear from the context that "refinery" is meant, text should be changed to avoid any poss
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . We agree with the comment and intend to make these clarifications in a future rulemaking. These clarifications would not affect the regulatory requirements in the current final rule.
- Last published:
-
Where can I go to learn more?
PitWatch.org is the online home of the Berkeley Pit Public Education Committee. This volunteer committee educates residents, students, and the public about the environmental management of the Berkeley Pit. Information includes the geology, hydrology, current events, and ongoing academic research associated with the Berkeley Pit. This committee frequently shares their…
- Last published:
-
Must a refinery that produces both California gasoline and federal RFG designate each batch produced as either federal RFG or California gasoline, and maintain segregation of both products, even though the gasoline meets the requirements of both programs?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Section 80.375(c) requires that each batch of California gasoline be designated as such by the refiner or importer, and that California gasoline be segregated from gasoline that is not California gasoline at all points in the distribution system…
- Last published:
-
Truckers may obtain both premium gasoline and regular gasoline from a terminal in order to supply a retail outlet with midgrade gasoline. In such cases, if a truck obtains a load of gasoline from a terminal that consists of a mixture of gasoline from a te
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The regulation specifically exempts gasoline in trucks from the testing requirement for S-RGAS, and instead allows truckers to rely on the test result of the terminal supplying the truck carrier. See § 80.210(d)(4). Where a tanker truck receives…
- Last published:
-
Section 80.46(a) was amended by the rule to require the use of ASTM D-3246 to determine the sulfur content of butane. Many refiners and butane suppliers do not currently use that method. Requiring a new method prior to the 2004 effective date of the gasol
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The final gasoline sulfur rulemaking amended 40 CFR § 80.46(a) to require the use of ASTM D 3246-96 to determine the sulfur content of butane. We did not intend to require the use of this new test method…
- Last published:
-
Can butane blenders generate allotments and credits?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Section 80.340(b)(1) provides that butane blenders may comply with the gasoline sulfur rule sampling and testing requirements using test results from the butane supplier provided that certain requirements are met. One requirement is that the sulfur content of…
- Last published:
-
Does the gasoline sulfur rule require refiners and downstream parties to account for the sulfur content of a registered fuel additive, such as a corrosion inhibitor used to help prevent sulfur-related fuel gauge sending unit failures?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Currently, there is no requirement under the gasoline sulfur rule for refiners or downstream parties to demonstrate compliance with the gasoline sulfur standards for registered fuel additives. Parties who add fuel additives, however, are responsible for ensuring that…
- Last published:
-
If I certify a nonroad flexible-fuel engine under 40 CFR Part 1054, are owners and operators prohibited from using gasoline-ethanol blended fuels containing greater than 10 volume percent ethanol under 40 CFR 80.1504(a)(1) in my nonroad flexible-fuel engi
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . No, owners and operators of nonroad engines, vehicles, and equipment where the nonroad engine is certified under 40 CFR Part 1054 as a flexible-fuel engine are not prohibited from using gasoline-ethanol blended fuels containing greater than 10 volume…
- Last published:
-
Section 80.335(a)(2) requires refiners to retain sample portions for the most recent 20 samples collected, or for each sample collected during the most recent 21 day period, whichever is greater. Is a refinery that produces only one or two batches of gaso
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The cited section of the regulation specifies the minimum number of batch samples from a refinery, which once created, must be maintained (twenty). The regulation does not specifically address the maximum amount of time that any particular sample…
- Last published:
-
A refiner produces a batch of gasoline at its refinery. It collects a sample of the gasoline and conducts certification testing. The sulfur content test result is less than the 80 ppm refinery level standard. The gasoline is then moved to another tank wit
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The downstream standard applies to samples of gasoline subsequent to movement of the gasoline from the tank in which certification sampling is conducted, even when these subsequent samples are collected within the refinery or import facility where the…
- Last published:
-
Why are credits and allotments expressed in ppm-gallons and not in ppmbarrels, since barrels or thousand barrels are the commercial units used by refiners?
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Consistent with the requirements under the RFG program, § 80.195(a)(2) provides that, for purposes of sulfur compliance and reporting, volumes are expressed in gallons. Accordingly, credits and allotments are required to be calculated and reported in units of…
- Last published:
-
What test requirements exist for determination of the sulfur content of denatured ethanol? What test method must be used to determine the sulfur content of ethanol? In the absence of an approved test method, what guidance can the Agency provide fuel ethan
See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The regulations do not require an ethanol blender, producer or supplier to test ethanol for sulfur content. The regulations do prohibit blending denatured ethanol into gasoline if the sulfur content of the denatured ethanol exceeds 30 ppm. See…
- Last published:
-
How can I get involved?
EPA encourages the public to review our Community Involvement Plan (pdf) (66pp, 6MB) that lays out our specific community involvement activities, and how to become involved at the Site. You can also contact our Community Involvement Coordinator, Mackenzie Meter ( [email protected] ), for site updates and to be added to…
- Last published: