Search Frequent Questions

Filter By:

Active filters:

Remove all filters

Displaying 1 - 15 of 26 results

  • Can MOVES Report Output in Terms of Fuel Consumption?

    See More Frequent Questions about MOVES and Related Models . Although gallons of fuel consumed are not reported by MOVES, the factors used to convert total energy consumption (a MOVES reporting option) to gallons of fuel are contained in the FuelSubtype table (energy content, reported in kilojoules per gram of…

    • Last published:

  • How do I use MOVES at Project Scale?

    See More Frequent Questions about MOVES and Related Models . The MOVES model can estimate emissions at national, county or project scale. Project scale is useful for estimating an individual transportation project like an intersection or transit project, but it requires detailed inputs that describing the vehicle population and activity…

    • Last published:

  • Was Jatropha analyzed for this final rule and, if so, what D-code applies?

    See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The GHG emissions performance of a Jatropha-based pathway was not analyzed for the final rule because sufficient information was not available. Since EPA has not yet assigned a D code for this pathway, a producer cannot generate RINs…

    • Last published:

  • Under what conditions might a renewable fuel produced under an approved pathway in the RFS regulations qualify for use in Navy applications?

    See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Background: The U.S. Navy is seeking to blend biofuels with fossil-based fuels, such as F-76 fuel, which are often used in Navy marine vessels. The Navy asked EPA for guidance on whether such biofuels would be treated as…

    • Last published:

  • How Can I Determine the Effect of Speed on Vehicle Emissions?

    See More Frequent Questions about MOVES and Related Models . MOVES can be run in either “Inventory” or “Emission Rates” mode. With Emission Rates, MOVES reports emission rates for the 16 average speed bins used by MOVES for each hour of the day and additional emission rate output that may…

    • Last published:

  • My neighbor is re-siding and re-roofing his house and there is material all over the ground. Do I need to be worried about asbestos exposure?

    Not all house siding or roofing materials contain asbestos. If you are concerned the material might contain asbestos, you can ask your neighbor whether or not the material has been tested for asbestos. Federal regulations regarding renovations or demolitions of asbestos-containing materials do not apply to a homeowner’s renovation of…

    • Last published:

  • How do I know if I have asbestos in my home (in floor tile, ceiling tile, shingles, siding, etc.)?

    The only way to be sure whether a material contains asbestos is to have it tested by a qualified laboratory. EPA only recommends testing suspect materials if they are damaged (fraying, crumbling) or if you are planning a renovation that would disturb the suspect material. Samples should be taken by…

    • Last published:

  • Does MOVES Incorporate Anticipated Improvements in VOC Emission Factors Resulting from Improved Fuel Economy?

    See More Frequent Questions about MOVES and Related Models . Changes in fuel consumption affect VOC emissions by reducing refueling vapor losses and spillage. Other emissions (such as sulfates) are also affected by fuel consumption. MOVES incorporates changes due to fuel economy requirements that were finalized as of the date…

    • Last published:

  • Was Jatropha analyzed for this final rule and, if so, what D-code applies?

    See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The GHG emissions performance of a Jatropha-based pathway was not analyzed for the final rule because sufficient information was not available. Since EPA has not yet assigned a D code for this pathway, a producer cannot generate RINs…

    • Last published:

  • Can I use MOVES to Model Emissions from Vehicles in other Countries?

    See More Frequent Questions about MOVES and Related Models . The MOVES model was designed specifically to model the emissions from vehicles and equipment designed to meet emission standards in the United States. There are considerable challenges to adapting the MOVES framework to other nations, primarily around the need for…

    • Last published:

  • How can I run MOVES3 for the entire U.S or for an entire year?

    See More Frequent Questions about MOVES and Related Models . The most accurate national MOVES runs are done for every county and hour and then averaged together in the output, but, depending on your intended use of the results, it’s also possible to pre-aggregate the MOVES inputs to run the…

    • Last published:

  • What are the features available on the MOVES “Advanced Features” panel, and when would I use them?

    The MOVES graphical user interface (GUI) includes a panel for “Advanced Features,” which allows modelers to edit RunSpec inputs for preaggregation options and select input databases created by MOVES tools. The panel also includes some options that are obsolete or intended only for MOVES testing and development work. Each of…

    • Last published:

  • Can I model emissions from Electric, Fuel-Cell, and Hybrid Vehicles and Equipment in MOVES?

    See More Frequent Questions about MOVES and Related Models . Electric vehicles and equipment do not generate tailpipe or evaporative emissions like conventional vehicles. However, these vehicles do consume energy, leading to greenhouse gas emissions, and they generate brake and tire particulate matter (PM) emissions. MOVES includes electricity as a…

    • Last published:

  • Is MOVES the best tool for my work?

    See More Frequent Questions about MOVES and Related Models . EPA’s MOtor Vehicle Emission Simulator (MOVES) is a state-of-the-science emission modeling system that estimates emissions for U.S. mobile sources at the national, county, and project level for criteria air pollutants, greenhouse gases, and air toxics. States other than California must…

    • Last published:

  • I have changed my brakes in the past, should I be worried about asbestos exposure?

    Because some, but not all, automotive brakes and clutches available or in use today may contain asbestos, professional automotive technicians and home mechanics who repair and replace brakes and clutches can potentially be exposed to asbestos dust. Brake and clutch dust can be seen when a brake disk, drum, clutch…

    • Last published: