Search Frequent Questions

Displaying 1 - 15 of 32 results

• Can MOVES Report Output in Terms of Fuel Consumption?

  See More Frequent Questions about MOVES and Related Models . Although gallons of fuel consumed are not reported by MOVES, the factors used to convert total energy consumption (a MOVES reporting option) to gallons of fuel are contained in the FuelSubtype table (energy content, reported in kilojoules per gram of…

  • Last published: July 10, 2024

• What is the Tier 2 Vehicle & Gasoline Sulfur Program?

  See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The Tier 2 Vehicle and Gasoline Sulfur Program is a landmark program, begun in January 2004, that affects every new passenger vehicle and every gallon of gasoline sold in the U.S. By designing cleaner cars that run on…

  • Last published: July 15, 2024

• How do I use MOVES at Project Scale?

  See More Frequent Questions about MOVES and Related Models . The MOVES model can estimate emissions at national, county or project scale. Project scale is useful for estimating an individual transportation project like an intersection or transit project, but it requires detailed inputs that describing the vehicle population and activity…

  • Last published: August 2, 2024

• How Can I Determine the Effect of Speed on Vehicle Emissions?

  See More Frequent Questions about MOVES and Related Models . MOVES can be run in either “Inventory” or “Emission Rates” mode. With Emission Rates, MOVES reports emission rates for the 16 average speed bins used by MOVES for each hour of the day and additional emission rate output that may…

  • Last published: October 23, 2024

• Does MOVES Incorporate Anticipated Improvements in VOC Emission Factors Resulting from Improved Fuel Economy?

  See More Frequent Questions about MOVES and Related Models . Changes in fuel consumption affect VOC emissions by reducing refueling vapor losses and spillage. Other emissions (such as sulfates) are also affected by fuel consumption. MOVES incorporates changes due to fuel economy requirements that were finalized as of the date…

  • Last published: July 10, 2024

• Can a refiner or importer use gasoline sulfur test methods other than ASTM D 2622-98, especially for sulfur levels of 10 ppm and less?

  See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The rule designates ASTM D 2622 as the benchmark test method by which compliance will be determined, and that is the test that the Agency typically will use in establishing compliance. However, the rule does permit alternative test…

  • Last published: July 12, 2024

• There is significant difference between "refiner" and "refinery". Portions of the regulations use "refiner" where "refinery" is the appropriate term. While it may be clear from the context that "refinery" is meant, text should be changed to avoid any poss

  See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . We agree with the comment and intend to make these clarifications in a future rulemaking. These clarifications would not affect the regulatory requirements in the current final rule.

  • Last published: July 15, 2024

• Can I use MOVES to Model Emissions from Vehicles in other Countries?

  See More Frequent Questions about MOVES and Related Models . The MOVES model was designed specifically to model the emissions from vehicles and equipment designed to meet emission standards in the United States. There are considerable challenges to adapting the MOVES framework to other nations, primarily around the need for…

  • Last published: October 10, 2024

• How can I run MOVES3 for the entire U.S or for an entire year?

  See More Frequent Questions about MOVES and Related Models . The most accurate national MOVES runs are done for every county and hour and then averaged together in the output, but, depending on your intended use of the results, it’s also possible to pre-aggregate the MOVES inputs to run the…

  • Last published: December 19, 2024

• When will construction begin in the Silver-Bow Creek Corridor?

  Construction in the Silver Bow Creek corridor began in 2024 with the Grove Gulch Project.

  • Last published: February 25, 2025

• Must a refinery that produces both California gasoline and federal RFG designate each batch produced as either federal RFG or California gasoline, and maintain segregation of both products, even though the gasoline meets the requirements of both programs?

  See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Section 80.375(c) requires that each batch of California gasoline be designated as such by the refiner or importer, and that California gasoline be segregated from gasoline that is not California gasoline at all points in the distribution system…

  • Last published: July 12, 2024

• Truckers may obtain both premium gasoline and regular gasoline from a terminal in order to supply a retail outlet with midgrade gasoline. In such cases, if a truck obtains a load of gasoline from a terminal that consists of a mixture of gasoline from a te

  See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The regulation specifically exempts gasoline in trucks from the testing requirement for S-RGAS, and instead allows truckers to rely on the test result of the terminal supplying the truck carrier. See § 80.210(d)(4). Where a tanker truck receives…

  • Last published: July 12, 2024

• Section 80.46(a) was amended by the rule to require the use of ASTM D-3246 to determine the sulfur content of butane. Many refiners and butane suppliers do not currently use that method. Requiring a new method prior to the 2004 effective date of the gasol

  See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . The final gasoline sulfur rulemaking amended 40 CFR § 80.46(a) to require the use of ASTM D 3246-96 to determine the sulfur content of butane. We did not intend to require the use of this new test method…

  • Last published: July 15, 2024

• Can butane blenders generate allotments and credits?

  See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Section 80.340(b)(1) provides that butane blenders may comply with the gasoline sulfur rule sampling and testing requirements using test results from the butane supplier provided that certain requirements are met. One requirement is that the sulfur content of…

  • Last published: July 15, 2024

• Does the gasoline sulfur rule require refiners and downstream parties to account for the sulfur content of a registered fuel additive, such as a corrosion inhibitor used to help prevent sulfur-related fuel gauge sending unit failures?

  See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . Currently, there is no requirement under the gasoline sulfur rule for refiners or downstream parties to demonstrate compliance with the gasoline sulfur standards for registered fuel additives. Parties who add fuel additives, however, are responsible for ensuring that…

  • Last published: July 15, 2024