Search Frequent Questions

Filter By:

Active filters:

Remove all filters

Displaying 1 - 15 of 65 results

  • Hot Work Definition and Requirements

    Facilities subject to the Program 3 Prevention Program requirements in 40 CFR Part 68 must include in their Risk Management Plan the date of the most recent review or revision of hot work permit procedures in Section 7.13. What is considered hot work and what are the requirements related to…

    • Last published:

  • Do I have to conduct incident investigations of releases resulting from theft?

    The incident investigation provisions of 40 CFR Part 68 (§§68.60 and 68.81) require facilities to investigate incidents that resulted in or could reasonably have resulted in a catastrophic release. Are covered facilities required to perform incident investigations of releases resulting from theft of covered substances, such as anhydrous ammonia? If…

    • Last published:

  • Do Program 1 processes have to complete a process hazard analysis?

    Do owners or operators of Program 1 processes have to complete a process hazard analysis? No. The Program 1 requirements do not include a process hazard analysis (40 CFR §68.12(b)). Program 3 processes require completion of a process hazard analysis (40 CFR §68.12(d)(3)) while Program 2 processes must complete a…

    • Last published:

  • Is a hazard review synonymous with a process hazard analysis (PHA)?

    The prevention program requirements under 40 CFR Part 68, Subparts C and D, include hazard reviews and process hazard analyses. Is a hazard review synonymous with a process hazard analysis (PHA)? No. A hazard review is different from a PHA. A hazard review is part of the Program 2 prevention…

    • Last published:

  • How often must compliance audits be performed?

    How often must owners or operators of stationary sources subject to the risk management program regulations perform compliance audits? The regulations at 40 CFR §§68.58(a) and 68.79(a) state that owners or operators must certify that they have evaluated compliance with the applicable prevention program provisions at least once every three…

    • Last published:

  • Can MOVES Report Output in Terms of Fuel Consumption?

    See More Frequent Questions about MOVES and Related Models . Although gallons of fuel consumed are not reported by MOVES, the factors used to convert total energy consumption (a MOVES reporting option) to gallons of fuel are contained in the FuelSubtype table (energy content, reported in kilojoules per gram of…

    • Last published:

  • How do I use MOVES at Project Scale?

    See More Frequent Questions about MOVES and Related Models . The MOVES model can estimate emissions at national, county or project scale. Project scale is useful for estimating an individual transportation project like an intersection or transit project, but it requires detailed inputs that describing the vehicle population and activity…

    • Last published:

  • How Can I Determine the Effect of Speed on Vehicle Emissions?

    See More Frequent Questions about MOVES and Related Models . MOVES can be run in either “Inventory” or “Emission Rates” mode. With Emission Rates, MOVES reports emission rates for the 16 average speed bins used by MOVES for each hour of the day and additional emission rate output that may…

    • Last published:

  • How do I verify that the fees I am being asked to pay are correct?

    Answer: Click the link that applies to your application type: Firm Individual Training Provider If you still have questions, call the National Lead Information Center at 1-800-424-LEAD . Question Number: 23002-37013 Find a printable PDF copy of all frequent questions pertaining to lead .

    • Last published:

  • How do I know that my transaction will be secure?

    Answer: Online transactions are managed by the U.S. Department of Treasury. For more information regarding the security controls in place to protect your transactions, please visit https://pay.gov/public/home . Question Number: 23002-37016 Find a printable PDF copy of all frequent questions pertaining to lead .

    • Last published:

  • How does my firm become Renovation, Repair, and Painting (RRP) Certified?

    Answer : EPA's Renovation, Repair, and Painting program applies to all states, tribes and territories where EPA has not specifically provided authorization for that state, tribe or territory to operate the program themselves. Currently, there are 15 states and 1 tribe that are authorized by EPA to operate their own…

    • Last published:

  • How does my firm become Abatement Certified?

    Answer: EPA's Abatement program applies to all states, tribes and territories where EPA has not specifically provided authorization for that state, tribe or territory to operate the program themselves. EPA only administers the abatement program in the following states, tribes and territories: Alaska, Arizona, Florida, Idaho, Montana, Nevada, New Mexico…

    • Last published:

  • How do I become certified as an Individual in the Lead Abatement program?

    Answer: EPA's Abatement program applies to all states, tribes and territories where EPA has not specifically provided authorization for that state, tribe or territory to operate the program themselves. EPA only administers the abatement program in the following states, tribes and territories: Alaska, Arizona, Florida, Idaho, Montana, Nevada, New Mexico…

    • Last published:

  • How do I become accredited as a Training Provider?

    Answer: Trainers seeking accreditation in an EPA administered state must submit their applications and fees online through EPA’s CDX system, the EPA’s electronic reporting system: https://cdx.epa.gov . If you have not previously created a CDX account, click “Register with CDX”, accept the terms, choose “LEAD: Lead-Based Paint Program”, and select…

    • Last published:

  • Does compliance under OSHA's PSM demonstrate compliance with the risk management program?

    The Clean Air Act Amendments of 1990 (CAAA) mandated the Occupational Safety and Health Administration (OSHA) to develop a regulatory program to protect workers from the risk of accidents that involve hazardous chemicals. OSHA promulgated its Process Safety Management Standard (PSM) on February 24, 1992 (57 FR 6356), codified at…

    • Last published: