Search Frequent Questions

Filter By:

Active filters:

Remove all filters

Displaying 1 - 15 of 59 results

  • Where can I download hourly emissions data from continuous monitoring?

    Hourly emissions data files are available from the Clean Air Markets Division of EPA, collected as part of 40 CFR Part 75. The download location has changed in February, 2023. The new location is https://campd.epa.gov/data/bulk-data-files . Once on this new site, use the menu (at the left) and the Keyword…

    • Last published:

  • Where can I find older NEI data (prior to 2008)?

    The raw data and summaries that are still available (dating back to 1990) can be obtained from the web page https://www.epa.gov/air-emissions-inventories/pollutant-emissions-summary-files-earlier-neis . Starting with 2001 data, a more limited selection of summary files are available.

    • Last published:

  • How do the different parts of particulate matter (PM) fit together?

    The various parts of PM in the NEI are related as follows. PM10-FIL > PM25-FIL because PM10-FIL includes PM25-FIL PM25-PRI = PM25-FIL + PM-CON This equation only applies at the process level. Because some sources only can report PM2.5 (due to test method differences), this equation does not apply to…

    • Last published:

  • How does PM2.5 relate to PM species such as EC, OC, SO4, NO3, PMFINE, and DIESEL-PM25?

    Primary PM2.5 estimates are speciated into the five PM species in the NEI: elemental (black) carbon (EC), organic carbon (OC), nitrate (NO3), sulfate (SO4), and the remainder of PM25-PRI (PMFINE). Diesel engine PM25-PRI and PM10 emissions are also labeled as DIESEL-PM25 and DIESEL-PM10 for mobile source diesel engines. For all…

    • Last published:

  • Can a facility divide a process when assigning program levels?

    My process includes a series of interconnected units, as well as several storage vessels that are co-located. Several sections of the process could qualify for Program 1. Can I divide my process into sections for the purpose of assigning Program levels? No, you cannot subdivide a process for this purpose…

    • Last published:

  • If a stationary source has processes ineligible for Program 1, are all processes ineligible?

    If a stationary source has several processes that are covered under 40 CFR Part 68, and some of those processes have had an accidental release within the past five years (effectively making those processes ineligible for Program 1 status), are the individual processes from which no accidents have occurred also…

    • Last published:

  • If a covered process has an accident, when does it lose eligibility for Program 1 status?

    A process covered under 40 CFR Part 68 is eligible for Program 1 requirements if it meets all of the criteria listed at 40 CFR §68.10(b). Those criteria include a requirement that the process cannot have had an accidental release of a regulated substance that led to offsite death, injury…

    • Last published:

  • Applicability of program levels and prevention program requirements for co-located vessels

    I have a tank with 1,000,000 pounds of toluene diisocyanate (TDI), which is covered under the RMP rule, but not under OSHA PSM. Considered by itself, the TDI would be Program 2 for EPA. The tank, however, is close to equipment that has chlorine above the applicable threshold and is…

    • Last published:

  • Changing from a Program 2 or 3 process to a Program 1 process

    If five years have passed since the last accident involving a covered process, and that process meets the other two requirements identified under 40 CFR §68.10(b) for Program 1 eligibility, could that process become a Program 1 process even if it had previously been identified as a Program 2 or…

    • Last published:

  • To whom do I report an oil discharge?

    A facility should report discharges to the National Response Center (NRC) at 1-800-424-8802 or 1-202-267-2675 . The NRC is the federal government's centralized reporting center, which is staffed 24 hours per day by U.S. Coast Guard personnel. If reporting directly to NRC is not practicable, reports also can be made…

    • Last published:

  • When must I report an oil discharge to NRC?

    Any person in charge of a vessel or an onshore or offshore facility must notify the National Response Center (NRC) immediately after he or she has knowledge of the discharge.

    • Last published:

  • How complete are the data in the National Emissions Inventory?

    While the goal of the National Emissions Inventory (NEI) program is to include all emissions data, there are always challenges meeting this goal. The answer about completeness of coverage of sources depends on the emissions sector and pollutant. In general, the criteria air pollutants and precursors (CAPs) are expected to…

    • Last published:

  • Where is more information available about emissions estimation methods used by the EPA?

    For criteria air pollutants and precursors as well as for hazardous air pollutants, the methods are described in the technical support document (TSD) for the latest National Emissions Inventory (NEI) available from the main NEI page . For greenhouse gas emissions, you can find greenhouse gas inventory methods from the…

    • Last published:

  • What sources make up the Tier 1 categories used in the emissions trends?

    Tier 1 categories are assigned by source classification codes (SCCs) that are the most specific processes available in the NEI. The latest SCC list with the Tier 1 assignments can be downloaded from the EPA SCC website in Comma Separate Values (CSV) format.

    • Last published:

  • What is the cause of the large decrease in electric utility emissions, particularly sulfur dioxide, starting in 1995?

    SO2 emissions reductions from utilities during this time are primarily attributed to the impacts of the acid rain program. As described on EPA’s Acid Rain Program web page, Phase 1 of this program began in 1995 and affected 263 units at 110 most coal-burning electric utility plants in 21 eastern…

    • Last published: