SHAMANTRA GREEN
TECHNICAL PRODUCT BULLETIN: B-68
USEPA, OEM REGULATIONS IMPLEMENTATION DIVISION
LISTING DATE: AUGUST 8, 2011
“SHAMANTRA GREEN”
(aka, SHAMANTRA BIO)
I. NAME, BRAND, OR TRADEMARK |
---|
SHAMANTRA GREEN (aka, SHAMANTRA BIO) Type of Product: Bioremediation Agent (Nutrient Additive) |
II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT |
---|
Molecular Mediation LLC |
III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS |
---|
Molecular Mediation PTY LTD |
IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION |
---|
1. Flammability: Non-flammable (DOT: Non-hazardous) 2. Ventilation: No special requirements 3. Skin and eye contact; protective clothing; treatment in case of contact: No special equipment or clothing required, however goggles are recommended. If eye or skin irritation occurs, flush with plenty of fresh water. 4.a. Maximum storage temperature: 200°F 4.b. Minimum storage temperature: None 4.c. Optimum storage temperature range: 40°F to 140°F 4.d. Temperatures of phase separation and chemical changes: Stable |
V. SHELF LIFE |
---|
>3 years when stored in sealed silos, polydrums, poly bags or totes. |
VI. RECOMMENDED APPLICATION PROCEDURE |
---|
1. Application Method:
Recommended Uses and Product Description Water Applications Shamantra Green can also be used in booms, sacks, and pillows. For large spills on fresh or salt water, Shamantra Green can be deployed into the spill using an air or water stream. Shamantra Green will remove oils and other hazardous hydrocarbon based materials from both salt and fresh water very effectively using an encapsulation process on the spilled oil. Once encapsulated into the carbon matrix of Shamantra Green, the spilled oil will not leach out, even under pressure. The humic acid then acts as a nutrient to stimulate microbial activity and enhance the bioremediation of the spilled oil. Any encapsulated residue can be removed from the water with hand vacuums, vacuum barges, commercial nets, centrifuges, etc. Encapsulated materials can be sent to landfill or used as a fuel source for generating heat ensuring that any material disposed of is in accordance with all applicable federal, state, and local regulations. Shoreline Applications To recover encapsulated oil or hazardous materials from spills on land, the encapsulated product can be collected and removed efficiently and effectively using a variety of manual and mechanical methods including picking up by hand, using brooms, rakes and shovels to remove and pick up encapsulated petroleum waste product. Mechanical means include using hand held vacuums, portable vacuum units, and vacuum vehicles. Once the Shamantra Green has been saturated with oil or hazardous materials, it will not leach the contaminants, even under pressure, so any encapsulated materials can be disposed of appropriately or used as a fuel source for generating heat ensuring that any material disposed of is in accordance with all applicable federal, state, and local regulations. Proper precautions, including testing as necessary to identify the characteristics of wastes encapsulated by Shamantra Green should be taken to determine the safe and legally required means of recovering, handling, storing, transporting, treating, recycling, or disposing of materials on land in accordance with all applicable federal, state, and local regulations. 2. Concentration/Application Rate: 3. Conditions for Use: |
VII. TOXICITY AND EFFECTIVENESS | ||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
a. Effectiveness: Bioremediation Agent Effectiveness Test (40 CFR 300.900), Federal Register September 15, 1994: Summary Data Table:
Results of Gravimetric Analysis: Percentage (%) Decrease in Weight of Oil on Day 28 Control: 14.4% Nutrient: 0.0% Product: 25.4% |
VIII. MICROBIOLOGICAL ANALYSIS |
---|
Nutrient Additive: No special requirements are required other than the product can be stored in dry conditions with an optimum storage temperature of 40°F to 140°F and a maximum storage temperature of 200°F. |
IX. PHYSICAL PROPERTIES |
---|
NA |
X. ANALYSIS OF HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS |
---|
NA |