Louisiana SIP: LAC 33:III Ch. 21 Section 2137 - Control of Emissions from Gasoline Terminal Vapor-Tight Control Procedure, SIP effective August 4, 2011 (LAd34)
Regulatory Text:
Louisiana Administrative Code, Title 33 ENVIRONMENTAL QUALITY, Part III Air (LAC 33:III)
Chapter 21. Control of Emission of Organic Compounds
Subchapter F. Gasoline Handling
Section 2137. Gasoline Terminal Vapor-Tight Control Procedure
As approved by EPA July 5, 2011 (76 FR 38977) SIP effective August 4, 2011 (LAd34).
Regulations.gov docket EPA-R06-OAR-2007-0924
Unless otherwise indicated, paragraphs are as previously approved by EPA 05/05/94 (59 FR 23166) SIP effective 06/06/94 (LAc60).
A. Gasoline Tank Trucks
AQ145 §2137.A.1;LAd34;LA021.02;AQ145;LR22:1212p13(12/20/1996)
1. Testing Procedure. Gasoline tank trucks and their vapor collection systems shall not sustain a pressure change of more than three inches of water (0.75 kPa) in five minutes when pressurized to 18 inches of water (4.5 kPa) or evacuated to six inches of water (1.5 kPa) using Test Methods 27 (40 CFR part 60, appendix A, as incorporated by reference at LAC 33:III.3003) for determination of vapor tightness of gasoline delivery tanks using pressure–vacuum test.
2. Inspection Sticker Required. All tank trucks must have a sticker displayed on each tank indicating the identification number of the tank and the date each tank last passed the pressure and vacuum test described in LAC 33:III.2137.A.1. Each tank must be certified annually and the sticker must be displayed near the Department of Transportation certification plate. Any repairs necessary to pass the specified requirements must be made within 15 days of failure.
B. Vapor Collection System
AQ145 §2137.B.1;LAd34;LA021.02;AQ145;LR22:1212p13-14(12/20/1996)
1. Requirements for Potential Leak Source. Loading and unloading operations at gasoline terminals shall not produce a reading equal to or greater than 100 percent of the lower explosive limit (LEL, measured as propane) at 2.5 centimeters around the perimeter of a potential leak source as detected by a combustible gas detector using Test Method 21 (40 CFR part 60, appendix A, as incorporated by reference at LAC 33:III.3003) for determination of volatile organic compound leaks.
2. Design and Operating Requirements. Vapor collection and processing equipment shall be designed and operated to prevent tank truck gauge pressure from exceeding 18 inches of water (4.5 kPa) and prevent vacuum from exceeding 6 inches of water (1.5 kPa).
3. The vapor collection system will be inspected annually:
a. if the administrative authority determines that there is an excessive number of leaks during any given test by the terminal operator or by an administrative authority representative, an increase in the monitoring frequency may be requested:
b. if the vapor collection system fails to pass inspection, any repairs necessary to pass the specified requirements must be made within 15 days of failure.
C. Exemptions. All loading and unloading facilities for crude oil and condensate, for ships and barges and for facilities loading or unloading only liquified petroleum gas are exempt from LAC 33:III.2137.
D. Recordkeeping Requirements. The gasoline terminal operator shall maintain records at the facility for at least two years indicating the last time the vapor collection facility passed the requirements specified in LAC 33:III.2137.B.1. Items which required repair in order to pass the specified requirements must also be recorded during the annual test procedure.
***end Louisiana LAC 33:III Ch. 21, Section 2137, SIP effective August 4, 2011 (LAd34)***